Estes 810 220 Swift Flying Model Rocket Kit

Estes 810 220 Swift Flying Model Rocket Kit Reviews



Other Picture


Estes 810 220 Swift Flying Model Rocket Kit Feature

  • Sleek high speed design
  • Lightweight tumble recovery
  • Mini engine powered
  • Only 4.5" tall
  • Flies over 750'
This fun and easy to build "itty-bitty" rocket really scoots through the sky. The 220 Swift is sleek and launches on mini-engines then tumbles back to earth.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 01, 2011 09:58:04
0 comments
Labels: ,

Condor Model Rocket Boosted Glider

Condor Model Rocket Boosted Glider Reviews



Other Picture


Condor Model Rocket Boosted Glider Feature

  • Unique rocket that boosts a glider high into the air.
  • Molded plastic parts makes it easy to assemble.
  • Skill Level: 2 - Previous Experience Suggested, but Not Required.
  • Length: 13.6" (34.5 cm), Diameter: 0.71" (18 mm)
  • Weight (without motor): 1.2 oz (35 gm)
The Condor is a competition style glider that is boosted into the sky using rocket power. It uses a molded plastic nose piece on the glider that insures easy release of the engine pod after the rocket reaches apogee. The glider then flies gently to the ground while the engine pod descends via an aluminized plastic streamer.This is a very rugged glider, and is great for modelers wanting to try something a bit different. The glider is made from the stiff and lightweight wood of the Chinese Tung tree.

The Condor Boost Glider rocket can fly with standard size rocket engines and is just as impressive in the sky as on the launch pad. It descends to the ground with a 18 inch diameter parachute.

The quality of the plastic parts, such as the injection molded fins and the blow molded nose cone is very impressive. About the only difference from USA made kits is that the engine mount is ever so slightly larger due to a small difference between the rocket motors flown by Chinese modelers versus the standard 18mm diameter motors flown here in the USA. But 18mm diameter motors work just fine in this kit; no modifications are needed.

One neat feature of the rocket is the convolutely wound paper body tubes. The tubes of the Condor rocket are unique in that it is convolutely rolled, as opposed to the spiral-wound tubes that are in other rockets. Convolutely wound means a whole sheet of paper was rolled up to make a tube. It is a little bit stronger than a spiral wound tube because there are no seams along the length of the tube. The other advantage of this is that the pattern of the rocket can be printed right on the model! With this rocket, you'll get a multi-color pattern that looks great when sitting on your display shelf.

Recommended 18mm diameter rocket engine: Estes A8-3, B6-4, C6-5, Apogee Components D10-5, or Quest Aerospace A6-4

Requires a rocket launch pad, plus assembly supplies like glue and tape.


Visit Store Now !!

Detail Products

Detail Reviews




May 30, 2011 19:11:31
0 comments
Labels: , , ,

Estes X Prize Eagle Flying Mode Rocket Kit

Estes X Prize Eagle Flying Mode Rocket Kit Reviews



Other Picture


Estes X Prize Eagle Flying Mode Rocket Kit Feature

  • Estes XPrize Eagle Flying Model Rocket Kit
  • Precision Parts including display nozzles
  • Parachute Recovery - Flies 500 feet
  • Laser cut Balsa parts - almost 20 inches tall
  • Requires assembly - level 3 - paint and glue NOT included
The Estes Eagle is a 1:91 scale version of the Vanguard Spacecraft Ansari X PRIZE competition spaceship. The Eagle is a towering rocket that stands almost 150 feet tall in real life. -- The Estes Eagle is a beautifully detailed 19-1/2 inch model that flies 500 feet into the skies using an Estes B or C engine. A colorful, fully assembled parachute is deployed for a safe recovery. -- This is a Skill Level 1 kit and is built using glue, modeling tools and paint. After you have the Eagle constructed and painted, simply apply the authentic decals and you have an accurate scale replica of an official Ansari X PRIZE spacecraft! -- Estes Eagle Rocket Specs: -- - Length: 19.5 in (49.5cm) -- - Dia: 1.637 in (41.6cm) -- - Weight: 3.0 oz (85.0g) -- - Recovery System: 12 in (30cm parachute -- - Max Altitude: 500ft (152.0m) -- - Recommended Engines: B4-2, B6-4, C6-3, C6-5 -- Assembly required. Glue, finishing supplies and launch supplies (not included).


Visit Store Now !!

Detail Products

Detail Reviews




May 29, 2011 19:05:24
0 comments
Labels: ,

3 Model Rocket Engines Estes C6-3

3 Model Rocket Engines Estes C6-3 Reviews



Other Picture


3 Model Rocket Engines Estes C6-3 Feature

  • 3 - Model Rocket Engines
  • 4 - Igniters with Igniter Plugs
  • 12 - Sheets of Recovery Wadding
  • ESTES Flight Pack
3 - Model Rocket Engines 4 - Igniters with Igniter Plugs 12 - Sheets of Recovery Wadding


Visit Store Now !!

Detail Products

Detail Reviews




May 28, 2011 22:41:29
0 comments
Labels: ,

ToySmith Extreme Glider Rider

ToySmith Extreme Glider Rider Reviews



Other Picture


The Glider Rider includes two 6"" foam gliders that piggy-back onto an 11 1/4"" foam-tipped rocket that's propelled by a foot activated launcher. The Triple Strike Rocket pack includes a launcher and three 11 1/4"" foam tipped rockets.


Visit Store Now !!

Detail Products

Detail Reviews




May 27, 2011 15:16:10
0 comments
Labels: , ,

Scientific Explorer - Meteor Rocket

Scientific Explorer - Meteor Rocket Reviews



Other Picture


Scientific Explorer - Meteor Rocket Feature

  • Patented, High Performance Baking Soda & Vinegar Powered Rockets.
  • Power that blasts the Meteor over 100 feet into the sky.
  • Winner of Family Life Magazine's "32 Best Toys of the Year"
  • 20 inches tall!
  • Ages: 8+ yrs
The Meteor is a science experience kids will never forget. Go for a new altitude record by varying the proportions of baking soda and vinegar, try balsamic vinegar to see if it gives an extra "kick" to the fuel, change the fuselage length to test flight characteristics. Chemistry and physics will never be the same! The Power Secret Our baking soda and vinegar formula starts a chemical reaction inside the patented fueling module, creating enormous power that blasts the Meteor over 100 feet into the sky.


Visit Store Now !!

Detail Products

Detail Reviews




May 26, 2011 09:52:06
0 comments
Labels: , ,

Estes 3022 Payloader II Flying Model Rocket Kit

Estes 3022 Payloader II Flying Model Rocket Kit Reviews



Other Picture


Estes 3022 Payloader II Flying Model Rocket Kit Feature

  • Classic series kit
  • Clear payload section
  • Skill level 1
  • Laser cut Balsa fins
  • Flies up to 1000'
Ready to fly up to 1000 feet high, Clear payload section, Laser cut balsa fins, Returns to earth via a 12" parachute. Length: 17" Diameter: .98"


Visit Store Now !!

Detail Products

Detail Reviews




May 25, 2011 05:03:04
0 comments
Labels: , ,

Estes Super Shot Mini Flying Model Rockets Race Set, 1888!

Estes Super Shot Mini Flying Model Rockets Race Set, 1888! Reviews



Other Picture


This is the Super Shot Mini Flying Model Rocket Race Set from Estes®. Suitable for Ages 10 & Older. FEATURES: Drag race 700 feet into space! Deluxe carrying case transforms into the side-by-side launch pad. It stores the launch system (launch pads and rods, and controllers) and the rockets. Separate storage bins to hold engines, igniters, and igniter plugs. Both Slash and Streak are fully assembled & decorated mini rockets. Rockets return to earth via a 9 inch Hi-Viz Orange streamer. Detailed launching instructions, NAR safety code, Rocketeer's Guide, and full one year warranty. INCLUDES: (2) Model Rocket (1) Dual Launch System (1) Carrying Case REQUIRES: Engines: 1/4A3-3T or 1/2A3-4T or A3-4T (ESTT1507) or A10-3T (ESTT1511) Recovery Wadding (ESTT2274) 4 D Batteries (SANP3504) SPECS: Length: 4.5"" (11.4cm) Diameter: 0.693"" (18mm) Weight: 0.32oz (9g) Altitude: 700 ft (213m) kr8/12/05 ir/kh


Visit Store Now !!

Detail Products

Detail Reviews




May 24, 2011 02:43:04
0 comments
Labels: ,

Estes 806 Firestreak SST Flying Model Rocket Kit

Estes 806 Firestreak SST Flying Model Rocket Kit Reviews



Other Picture


Estes 806 Firestreak SST Flying Model Rocket Kit Feature

  • Simple snap together
  • Assembles in minutes
  • Mini engine powered
  • No paint needed
  • Flies over 350'
An Estes original! The first-ever snap together rocket! No fuss, no muss, simply snap the Firestreak SST together and get out and launch this hot looking rocket in minutes.


Visit Store Now !!

Detail Products

Detail Reviews




May 22, 2011 20:45:04
0 comments
Labels: ,

Mean Green Advanced Rocketry Kit

Mean Green Advanced Rocketry Kit Reviews



Other Picture


Mean Green Advanced Rocketry Kit Feature

  • Fins made from Balsa Wood
  • Altitude 1200ft / 360m

Specifications:
Skill Level: Three
Recovery: 18" Fabric Parachute
Fin Type: Balsa
Length: 24.5in / 62.2cm
Diameter: 1.97in / 50mm
Engines (Motors): D12-3 D12-5
Altitude (Estimated Max): 1200ft / 360m


Visit Store Now !!

Detail Products

Detail Reviews




May 21, 2011 20:22:04
0 comments
Labels: ,

Estes 1894 Skyhawker Flying Model Rocket Kit

Estes 1894 Skyhawker Flying Model Rocket Kit Reviews



Other Picture


Estes 1894 Skyhawker Flying Model Rocket Kit Feature

  • Ready to fly
  • No assembly required
  • Standard engine powered
  • Parachute recovery
  • Flies over 1125'
The Sky Hawker ready-to-fly rocket will prey on the clouds! This sleek bird will soar over 1,000 feet! But don't worry about losing it in the clouds! It will return gently to the ground on its pre-assembled 12 inch parachute.


Visit Store Now !!

Detail Products

Detail Reviews




May 20, 2011 11:53:04
0 comments
Labels: , ,

48" Red Model Rocket Parachute - Quality Rip-Stop Nylon

48" Red Model Rocket Parachute - Quality Rip-Stop Nylon Reviews



Other Picture


48" Red Model Rocket Parachute - Quality Rip-Stop Nylon Feature

  • Made with Rip-Stop nylon fabric
  • Polyester thread used
  • Reusable
  • Machine Washable
  • Eight sided
* Quality general use parachutes * Made with Rip-Stop nylon fabric * All edges sewn with professional grade Serger Sewing equipment * Braided Nylon cords - each shroud length about the diameter of the parachute (each cord is about twice the diameter) * Polyester thread used * Reusable * Machine Washable


Visit Store Now !!

Detail Products

Detail Reviews




May 18, 2011 22:34:05
0 comments
Labels: , , ,

1891 X-Prize SpaceShipOne RTF Launch Set

1891 X-Prize SpaceShipOne RTF Launch Set Reviews



Other Picture


This is the Mojave Aerospace Ventures SpaceShipOne Flying Model Rocket Launch Set from Estes®. Suitable for Ages 10 & Older. FEATURES: This model rocket is a scale replica of the Ansari X-Prize® Competition winner, SpaceShipOne. Ready to fly 400 feet high! Fully assembled & decorated. Returns to earth via a 12 inch parachute. Detailed launching instructions, NAR Safety Code, Rocketeer's Guide, and full one year warranty. INCLUDES: (1) SpaceShipOne Model Rocket (1) Electron Beam® Launch Controller (1) Porta-Pad® II Launch Pad REQUIRES: Engines: B4-2 (ESTT1601) or B6-2 (ESTT1605) or C6-3 (ESTT1613) 4 AA Batteries (SANP3501) SPECS: Scale: 1:30th Length: 13"" (33cm) Wingspan: 6.5"" (16.5mm) Diameter: 2.0"" (50.8mm) Weight: 3.0oz (85g) Altitude: 400 ft (122m) kr8/12/05 ir/kh


Visit Store Now !!

Detail Products

Detail Reviews




May 18, 2011 00:35:05
0 comments
Labels: ,